The Brothers That Just Do Gutters · Greensboro
Gutter Styles in Greensboro & Summerfield
K-style, half-round and radius gutters matched to your home, from a brick ranch to an older house with classic lines.
- Locally Owned & Operated
- K-Style & Half-Round
- Matched to Your Architecture
The Brothers That Just Do Gutters
Greensboro
- K-style for crisp, sturdy lines
- Half-round for classic homes
- Radius gutters to follow curved walls
- Free, no-pressure written estimates
Quick answer
Gutter Styles in Greensboro, NC: The Brothers That Just Do Gutters Greensboro installs K-style and half-round gutters, including radius gutters for curved walls, in the profile and material that suits your house. We serve homes across Greensboro, Summerfield and the surrounding areas. Call (336) 490-9686 or book online.
Gutter style mostly comes down to the profile you see from the street. K-style is the workhorse on most houses around Greensboro, and half-round gives a softer, traditional line that suits older and more formal homes. Both come in 5 and 6 inch, and both can follow a curved wall as a radius gutter.
Style also covers the parts that hold a gutter on the house: hangers, corners and downspouts. Those details decide how long a system lasts, so we walk through them below, along with the specialty materials each style comes in.
Gutter parts and profiles in Greensboro
Behind the profile: the hangers, corners and small parts that hold a gutter up
K-style or half-round is the choice you see from the curb. The parts that fasten the gutter to the house decide how long it lasts. Here is what each one does.
When an old gutter sags along a ranch in Lindley Park or pulls away from the fascia on an older home in Fisher Park, the profile is almost never to blame. It is the hardware: spikes backing out of swollen wood, a corner sealed once and forgotten, a downspout with no elbow at the bottom dumping water into the clay-heavy soil by the foundation.
You can often read an old system from the ground. A row of nail heads across the face of the gutter means nail and ferrule, and on older gutters there is a fair chance that is what holds them up. A clean face with no visible fasteners means hidden hangers. Half-round gutters sit in brackets fastened to the fascia.
How gutter hangers compare
| Hanger | How it holds | How it rates |
|---|---|---|
| Quick Screw hidden hanger | A pre-started screw driven at an angle through the back of the gutter into the fascia, with a shaft and an arched base for strength | Strongest hidden hanger option |
| Heavy duty hidden hanger | Corrugated on the inside for extra stiffness | Stronger than a standard hidden hanger, not as strong as Quick Screw |
| Standard hidden hanger | Hooks the front lip and screws into the fascia | Cheaper, but it cuts the gutter’s lifespan short |
| Nail and ferrule | A spike that passes through the gutter face, a ferrule and the back wall, then into the fascia | The old way. Loosens as the wood swells and shrinks with the seasons |
| Half-round #10 combo | A bracket on the fascia with a spring clip over the front lip | The standard hanger for half-round gutters |
Small parts that keep the water in line
- Gutter wedges close the gap when the fascia is angled or a molding sits behind the gutter.
- Bay miters join runs at 45 degree angles around bay windows and bump-outs.
- Roof straps support the gutter where no fascia exists, hooking onto the hanger and fastening to the roof.
- End caps get crimped and sealed so the end of each run stays dry.
- Conductor heads atop a downspout add character and catch the rush where a large roof area drains to one point.
- Elbows bring the downspout back to the wall, and one more at the bottom turns water away from the foundation.
Choosing a profile for your house
On most ranch and two-story homes around Greensboro, K-style carries the most water for the money, and the real upgrade is usually the hardware. On older homes and houses with more traditional lines, half-round often suits the architecture, especially in copper. Both profiles come in every metal in our specialty materials guide, and both can be formed as a radius gutter for a curved wall. Size is a separate decision, covered in our gutter size guide.
Rehang or replace?
If your gutters are sound but sagging on old spikes, re-hanging them on hidden hangers through gutter repair may be all they need. If the runs are sectional, leaking at the joints or bent, a full gutter installation with new seamless runs is usually the better spend. Your Solutionist will show you which parts are failing and price both options in writing.
Not sure what is holding your gutters up? Call (336) 490-9686
Get a Free EstimateGutter Style Questions, Answered
K-style has a flat back and a front shaped like the letter K. It is the most common profile on homes and commercial buildings because it carries a lot of water and the shape adds strength. Half-round is a rounded trough chosen mostly for its looks, so it is treated as a specialty style. Both come in 5 and 6 inch.
On most ranches and two-story homes around Greensboro and Summerfield, K-style gives a clean line and the most capacity for the money. On older homes and houses with traditional architecture, half-round often looks right, especially in copper. Seamless half-round is not available for every job, so ask your Solutionist, who can show you both profiles against your actual roofline.
Yes. K-style and half-round can both be formed as a radius gutter, which bends to follow a rounded section of the house. That keeps water handled along the curve instead of leaving a gap in the system. Ask about it at your free estimate.
The Quick Screw hidden hanger is the strongest we use. The screw comes already started, a shaft around it adds strength and a slight arch along the bottom stiffens it. It goes in at an angle through the back of the gutter into the fascia. Old nail and ferrule systems work loose as the wood swells and shrinks, which is why so many older gutters sag.
Corners are where a lot of gutters leak, so we seal each one in three places: on the manufacturer’s seam in the middle, on the inside where the runs overlap into it, and on top where they meet. Corners are also where pine needles and wet leaves pile up and hold water, so those seals matter around here. For bay windows and other angled walls, a bay miter joins the runs cleanly.
Not for drainage. Round and rectangular downspouts handle water and debris about the same, so the choice comes down to looks. Corrugated round downspouts are strong and look great with copper, while smooth round downspouts come only in copper and dent more easily. Rectangular downspouts come in 2 by 3 inch, standard with 5 inch gutters, and 3 by 4 inch, usually paired with 6 inch.
Services
More Ways We Help Greensboro Area Homeowners
Once you pick a profile, choose the material and size to match.
Copper, colored aluminum, galvanized and galvalume, available in K-style and half-round.
Learn more Copper GuttersHalf-round copper is the classic pick on older and high-end homes, and it develops a patina as it ages.
Learn more Gutter SizesYou can get either profile in 5 or 6 inch, and every run is sized to the roof that feeds it.
Learn more Fascia Board RepairA hanger can only hold as well as the wood it is screwed into, so we replace soft fascia before any new gutters are hung.
Learn more Gutter RepairLeaking corners, loose hangers and sagging runs on any style, fixed on the same visit when we can.
Learn more Free estimateRequest a Free EstimateTell us what is going on with your gutters. A local Solutionist walks the roofline, explains your options and leaves a written price. No pressure and no obligation.
Book my free estimate or call (336) 490-9686How it works
Picking Your Gutter Style, One Step at a Time
- 1Start the conversation
Call us or book online and share what you like, or do not like, about the gutters you have now.
- 2See it on your house
A Solutionist studies your roofline and the style of the house and shows you how each profile would look.
- 3Settle the details
Profile, size, color, hangers and downspouts all appear on a single free written estimate.
- 4Install and review
Our crew installs the gutters, seals each corner and walks the job with you before we go.
Why the Brothers
Why Greensboro Homeowners Call the Brothers
We match the gutter to the architecture, not just the roof. A classic older home in Fisher Park and a newer build in Adams Farm should not get the same answer.
Hidden hangers, triple-sealed corners and properly sized downspouts are standard. That is where most gutters fail, so that is where we put the effort.
Carlos and Marina Villegas run this franchise from Alliance Drive in Greensboro, close to the homes we work on in Greensboro and Summerfield.
Every review gets published, positive or negative. Read what your Greensboro neighbors had to say before you ever call us.
Year-round
Your Greensboro gutter calendar
How the year breaks down on Greensboro rooflines, and what we are doing in each stretch.
- Fall · Sep to NovLeaf season clean-outs
Oak and maple leaves and loblolly pine needles cleared out as they drop, with gutter guards going on before the last of the canopy lets go. September is also the wettest month of the year.
- Winter · Dec to FebIce and fallen limbs
Cold rain and the odd ice storm. We clear the late leaves that keep water from draining, and repair sections pulled loose by ice or a falling limb.
- Spring · Mar to MayPollen and tassel flush
Oak tassels and pine pollen flushed out of troughs and outlets, and guards installed before thunderstorm season starts.
- Summer · Jun to AugThunderstorm season
Summer pop-up thunderstorms put every run to the test, so this is when we size up gutters and downspouts and fix the places that spill.
The Work
Real Crews. Real Greensboro Homes.



Reviews
What Greensboro Homeowners Say
“Carlos and his team were professional and their prices reasonable. They communicated throughout the process and left the job site clean. Would recommend for gutter, soffit, and fascia work.”
Posted on Google“I’ve worked with Carlos a couple times and he has been wonderful! Thanks and hope to see you again (but hopefully not too soon!)”
Posted on Google“Excellent service, and they definitely exceeded what I asked for and expected! I highly recommend their services and business!”
Posted on GoogleService area
Greensboro communities we serve
Every community on this list is inside our service area and gets the same local crew, on-site seamless gutters and free written estimates. Call (336) 490-9686 or request a free quote and a Solutionist will come out.
- Greensboro
- Summerfield
- Irving Park
- Fisher Park
- Hamilton Lakes
- Lake Jeanette
- Starmount
- Lindley Park
- Adams Farm
- Guilford College
Free estimates
Which profile fits your house?
Schedule a free estimate and a Greensboro Solutionist will show you K-style and half-round on your own roofline, with a written price.
The Brothers That Just Do Gutters · Greensboro · (336) 490-9686 · 3714 Alliance Dr #111, Greensboro, NC 27407
Wind and leaves season is hitting hard.Protect your home before it’s too late.
Fall wind is stripping the oaks, maples and pines across Greensboro and Summerfield, and every gust drops more into your gutters. Once they clog, the next hard rain spills over and sends water toward your roof, walls and foundation. Get on a regular maintenance schedule and add gutter guards now, so your home is protected before the damage starts.
♿
Bigger Text
Biggest Text
Text Spacing
Readable Font
Highlight Links
Highlight Titles
Big Cursor
High Contrast
Invert Colors
Grayscale
Pause Motion
Locally Owned & Operated · Greensboro, North Carolina · Serving Greensboro, Summerfield and the surrounding areas

Specialty Materials
Copper Gutters
Gutter Sizes