Leaf season is here in the Triad. Get your gutters cleaned before the last oaks let go◆Oak leaves, pine needles and maple seeds fill Greensboro gutters fast. BroGuard keeps them out◆Free gutter quotes: call (336) 490-9686◆Seamless gutter installation by your local Greensboro crew◆Leaf season is here in the Triad. Get your gutters cleaned before the last oaks let go◆Oak leaves, pine needles and maple seeds fill Greensboro gutters fast. BroGuard keeps them out◆Free gutter quotes: call (336) 490-9686◆Seamless gutter installation by your local Greensboro crew◆

The Brothers That Just Do Gutters · Greensboro

Gutter Styles in Greensboro & Summerfield

K-style, half-round and radius gutters matched to your home, from a brick ranch to an older house with classic lines.

  • Locally Owned & Operated
  • K-Style & Half-Round
  • Matched to Your Architecture

The Brothers That Just Do Gutters
Greensboro

  • K-style for crisp, sturdy lines
  • Half-round for classic homes
  • Radius gutters to follow curved walls
  • Free, no-pressure written estimates
(336) 490-9686
Solutionists, Not Salespeople◆Locally Owned in Greensboro◆Serving Greensboro & Summerfield◆Seamless Gutter Installation & Replacement◆Gutter Guard Installation◆Gutter Cleaning, Repair & Maintenance◆Every Review Published, Good or Bad◆★★★★★ 4.9 Stars on Google◆Part of a National Brand Founded in 1999◆Free Gutter Quotes: (336) 490-9686◆Solutionists, Not Salespeople◆Locally Owned in Greensboro◆Serving Greensboro & Summerfield◆Seamless Gutter Installation & Replacement◆Gutter Guard Installation◆Gutter Cleaning, Repair & Maintenance◆Every Review Published, Good or Bad◆★★★★★ 4.9 Stars on Google◆Part of a National Brand Founded in 1999◆Free Gutter Quotes: (336) 490-9686◆

Quick answer

Gutter Styles in Greensboro, NC: The Brothers That Just Do Gutters Greensboro installs K-style and half-round gutters, including radius gutters for curved walls, in the profile and material that suits your house. We serve homes across Greensboro, Summerfield and the surrounding areas. Call (336) 490-9686 or book online.

Gutter style mostly comes down to the profile you see from the street. K-style is the workhorse on most houses around Greensboro, and half-round gives a softer, traditional line that suits older and more formal homes. Both come in 5 and 6 inch, and both can follow a curved wall as a radius gutter.

Style also covers the parts that hold a gutter on the house: hangers, corners and downspouts. Those details decide how long a system lasts, so we walk through them below, along with the specialty materials each style comes in.

Gutter parts and profiles in Greensboro

Behind the profile: the hangers, corners and small parts that hold a gutter up

K-style or half-round is the choice you see from the curb. The parts that fasten the gutter to the house decide how long it lasts. Here is what each one does.

When an old gutter sags along a ranch in Lindley Park or pulls away from the fascia on an older home in Fisher Park, the profile is almost never to blame. It is the hardware: spikes backing out of swollen wood, a corner sealed once and forgotten, a downspout with no elbow at the bottom dumping water into the clay-heavy soil by the foundation.

You can often read an old system from the ground. A row of nail heads across the face of the gutter means nail and ferrule, and on older gutters there is a fair chance that is what holds them up. A clean face with no visible fasteners means hidden hangers. Half-round gutters sit in brackets fastened to the fascia.

K or half-roundboth come in 5 and 6 inch
2 by 3 and 3 by 4the standard downspout sizes for each
3 sealson every corner our crews install
Hiddenhangers instead of spikes through the face

How gutter hangers compare

HangerHow it holdsHow it rates
Quick Screw hidden hangerA pre-started screw driven at an angle through the back of the gutter into the fascia, with a shaft and an arched base for strengthStrongest hidden hanger option
Heavy duty hidden hangerCorrugated on the inside for extra stiffnessStronger than a standard hidden hanger, not as strong as Quick Screw
Standard hidden hangerHooks the front lip and screws into the fasciaCheaper, but it cuts the gutter’s lifespan short
Nail and ferruleA spike that passes through the gutter face, a ferrule and the back wall, then into the fasciaThe old way. Loosens as the wood swells and shrinks with the seasons
Half-round #10 comboA bracket on the fascia with a spring clip over the front lipThe standard hanger for half-round gutters

Small parts that keep the water in line

  • Gutter wedges close the gap when the fascia is angled or a molding sits behind the gutter.
  • Bay miters join runs at 45 degree angles around bay windows and bump-outs.
  • Roof straps support the gutter where no fascia exists, hooking onto the hanger and fastening to the roof.
  • End caps get crimped and sealed so the end of each run stays dry.
  • Conductor heads atop a downspout add character and catch the rush where a large roof area drains to one point.
  • Elbows bring the downspout back to the wall, and one more at the bottom turns water away from the foundation.

Choosing a profile for your house

On most ranch and two-story homes around Greensboro, K-style carries the most water for the money, and the real upgrade is usually the hardware. On older homes and houses with more traditional lines, half-round often suits the architecture, especially in copper. Both profiles come in every metal in our specialty materials guide, and both can be formed as a radius gutter for a curved wall. Size is a separate decision, covered in our gutter size guide.

Rehang or replace?

If your gutters are sound but sagging on old spikes, re-hanging them on hidden hangers through gutter repair may be all they need. If the runs are sectional, leaking at the joints or bent, a full gutter installation with new seamless runs is usually the better spend. Your Solutionist will show you which parts are failing and price both options in writing.

Not sure what is holding your gutters up? Call (336) 490-9686

Get a Free Estimate

Gutter Style Questions, Answered

What is the difference between K-style and half-round gutters?

K-style has a flat back and a front shaped like the letter K. It is the most common profile on homes and commercial buildings because it carries a lot of water and the shape adds strength. Half-round is a rounded trough chosen mostly for its looks, so it is treated as a specialty style. Both come in 5 and 6 inch.

Which gutter style fits my home?

On most ranches and two-story homes around Greensboro and Summerfield, K-style gives a clean line and the most capacity for the money. On older homes and houses with traditional architecture, half-round often looks right, especially in copper. Seamless half-round is not available for every job, so ask your Solutionist, who can show you both profiles against your actual roofline.

Can gutters follow a curved wall?

Yes. K-style and half-round can both be formed as a radius gutter, which bends to follow a rounded section of the house. That keeps water handled along the curve instead of leaving a gap in the system. Ask about it at your free estimate.

Which gutter hangers last the longest?

The Quick Screw hidden hanger is the strongest we use. The screw comes already started, a shaft around it adds strength and a slight arch along the bottom stiffens it. It goes in at an angle through the back of the gutter into the fascia. Old nail and ferrule systems work loose as the wood swells and shrinks, which is why so many older gutters sag.

How do you keep gutter corners from leaking?

Corners are where a lot of gutters leak, so we seal each one in three places: on the manufacturer’s seam in the middle, on the inside where the runs overlap into it, and on top where they meet. Corners are also where pine needles and wet leaves pile up and hold water, so those seals matter around here. For bay windows and other angled walls, a bay miter joins the runs cleanly.

Are round downspouts better than rectangular ones?

Not for drainage. Round and rectangular downspouts handle water and debris about the same, so the choice comes down to looks. Corrugated round downspouts are strong and look great with copper, while smooth round downspouts come only in copper and dent more easily. Rectangular downspouts come in 2 by 3 inch, standard with 5 inch gutters, and 3 by 4 inch, usually paired with 6 inch.

Services

More Ways We Help Greensboro Area Homeowners

Once you pick a profile, choose the material and size to match.

How it works

Picking Your Gutter Style, One Step at a Time

  1. 1Start the conversation

    Call us or book online and share what you like, or do not like, about the gutters you have now.

  2. 2See it on your house

    A Solutionist studies your roofline and the style of the house and shows you how each profile would look.

  3. 3Settle the details

    Profile, size, color, hangers and downspouts all appear on a single free written estimate.

  4. 4Install and review

    Our crew installs the gutters, seals each corner and walks the job with you before we go.

Why the Brothers

Why Greensboro Homeowners Call the Brothers

01An eye for the house

We match the gutter to the architecture, not just the roof. A classic older home in Fisher Park and a newer build in Adams Farm should not get the same answer.

02Details that hold

Hidden hangers, triple-sealed corners and properly sized downspouts are standard. That is where most gutters fail, so that is where we put the effort.

03Owners close by

Carlos and Marina Villegas run this franchise from Alliance Drive in Greensboro, close to the homes we work on in Greensboro and Summerfield.

04Every review public

Every review gets published, positive or negative. Read what your Greensboro neighbors had to say before you ever call us.

Year-round

Your Greensboro gutter calendar

How the year breaks down on Greensboro rooflines, and what we are doing in each stretch.

  1. Fall · Sep to NovLeaf season clean-outs

    Oak and maple leaves and loblolly pine needles cleared out as they drop, with gutter guards going on before the last of the canopy lets go. September is also the wettest month of the year.

  2. Winter · Dec to FebIce and fallen limbs

    Cold rain and the odd ice storm. We clear the late leaves that keep water from draining, and repair sections pulled loose by ice or a falling limb.

  3. Spring · Mar to MayPollen and tassel flush

    Oak tassels and pine pollen flushed out of troughs and outlets, and guards installed before thunderstorm season starts.

  4. Summer · Jun to AugThunderstorm season

    Summer pop-up thunderstorms put every run to the test, so this is when we size up gutters and downspouts and fix the places that spill.

The Work

Real Crews. Real Greensboro Homes.

Gutters and downspouts on a two-story brick and sided home
Gutters and downspouts on a two-story brick and sided home
Stone and dark-sided colonial home with gutters
Stone and dark-sided colonial home with gutters
Two-story brick home with gutters, seen from above
Two-story brick home with gutters, seen from above

Reviews

What Greensboro Homeowners Say

Kris London★★★★★

“Carlos and his team were professional and their prices reasonable. They communicated throughout the process and left the job site clean. Would recommend for gutter, soffit, and fascia work.”

Posted on Google
Sonja Guthrie★★★★★

“I’ve worked with Carlos a couple times and he has been wonderful! Thanks and hope to see you again (but hopefully not too soon!)”

Posted on Google
Daniel Davis★★★★★

“Excellent service, and they definitely exceeded what I asked for and expected! I highly recommend their services and business!”

Posted on Google

Service area

Greensboro communities we serve

Every community on this list is inside our service area and gets the same local crew, on-site seamless gutters and free written estimates. Call (336) 490-9686 or request a free quote and a Solutionist will come out.

Free estimates

Which profile fits your house?

Schedule a free estimate and a Greensboro Solutionist will show you K-style and half-round on your own roofline, with a written price.

The Brothers That Just Do Gutters · Greensboro · (336) 490-9686 · 3714 Alliance Dr #111, Greensboro, NC 27407

×
Wind & Leaves Season

Wind and leaves season is hitting hard.Protect your home before it’s too late.

Fall wind is stripping the oaks, maples and pines across Greensboro and Summerfield, and every gust drops more into your gutters. Once they clog, the next hard rain spills over and sends water toward your roof, walls and foundation. Get on a regular maintenance schedule and add gutter guards now, so your home is protected before the damage starts.

Free EstimatesGutter GuardsGutter Cleaning & Maintenance
Book before the leaves bury your gutters
Get my free estimate →or call (336) 490-9686
♿
Accessibility
Bigger Text
Biggest Text
Text Spacing
Readable Font
Highlight Titles
Big Cursor
High Contrast
Invert Colors
Grayscale
Pause Motion
Reset all
Accessibility by CrowdBoost

Locally Owned & Operated · Greensboro, North Carolina · Serving Greensboro, Summerfield and the surrounding areas